Type Alias zerocopy::byteorder::native_endian::U16

pub type U16 = U16<NativeEndian>;

A 16-bit unsigned integer stored in native-endian byte order.

Aliased Type

struct U16(/* private fields */);

Implementations

impl<O> U16<O>

pub const ZERO: U16<O> = _

The value zero.

This constant should be preferred to constructing a new value using new, as new may perform an endianness swap depending on the endianness and platform.

pub const MAX_VALUE: U16<O> = _

The maximum value.

This constant should be preferred to constructing a new value using new, as new may perform an endianness swap depending on the endianness O and the endianness of the platform.

pub const fn from_bytes(bytes: [u8; 2]) -> U16<O>

Constructs a new value from bytes which are already in the endianness O.

impl<O: ByteOrder> U16<O>

pub fn new(n: u16) -> U16<O>

Constructs a new value, possibly performing an endianness swap to guarantee that the returned value has endianness O.

pub fn get(self) -> u16

Returns the value as a primitive type, possibly performing an endianness swap to guarantee that the return value has the endianness of the native platform.

pub fn set(&mut self, n: u16)

Updates the value in place as a primitive type, possibly performing an endianness swap to guarantee that the stored value has the endianness O.

Trait Implementations

impl<O: ByteOrder> Add<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the + operator.

fn add(self, rhs: U16<O>) -> U16<O>

Performs the + operation.

impl<O: ByteOrder> AddAssign<U16<O>> for U16<O>

fn add_assign(&mut self, rhs: U16<O>)

Performs the += operation.

impl<O> AsBytes for U16<O>where [u8; 2]: AsBytes, PhantomData<O>: AsBytes,

fn as_bytes(&self) -> &[u8]

Gets the bytes of this value.

fn as_bytes_mut(&mut self) -> &mut [u8] where Self: FromBytes,

Gets the bytes of this value mutably.

fn write_to(&self, bytes: &mut [u8]) -> Option<()>

Writes a copy of self to bytes.

fn write_to_prefix(&self, bytes: &mut [u8]) -> Option<()>

Writes a copy of self to the prefix of bytes.

fn write_to_suffix(&self, bytes: &mut [u8]) -> Option<()>

Writes a copy of self to the suffix of bytes.

impl<O: ByteOrder> AsMut<[u8; 2]> for U16<O>

fn as_mut(&mut self) -> &mut [u8; 2]

Converts this type into a mutable reference of the (usually inferred) input type.

impl<O: ByteOrder> AsRef<[u8; 2]> for U16<O>

fn as_ref(&self) -> &[u8; 2]

Converts this type into a shared reference of the (usually inferred) input type.

impl<O: ByteOrder> Binary for U16<O>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> BitAnd<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the & operator.

fn bitand(self, rhs: U16<O>) -> U16<O>

Performs the & operation.

impl<O: ByteOrder> BitAndAssign<U16<O>> for U16<O>

fn bitand_assign(&mut self, rhs: U16<O>)

Performs the &= operation.

impl<O: ByteOrder> BitOr<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the | operator.

fn bitor(self, rhs: U16<O>) -> U16<O>

Performs the | operation.

impl<O: ByteOrder> BitOrAssign<U16<O>> for U16<O>

fn bitor_assign(&mut self, rhs: U16<O>)

Performs the |= operation.

impl<O: ByteOrder> BitXor<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the ^ operator.

fn bitxor(self, rhs: U16<O>) -> U16<O>

Performs the ^ operation.

impl<O: ByteOrder> BitXorAssign<U16<O>> for U16<O>

fn bitxor_assign(&mut self, rhs: U16<O>)

Performs the ^= operation.

impl<O: Clone> Clone for U16<O>

fn clone(&self) -> U16<O>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<O: ByteOrder> Debug for U16<O>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<O> Default for U16<O>

fn default() -> U16<O>

Returns the “default value” for a type.

impl<O: ByteOrder> Display for U16<O>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> Div<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the / operator.

fn div(self, rhs: U16<O>) -> U16<O>

Performs the / operation.

impl<O: ByteOrder> DivAssign<U16<O>> for U16<O>

fn div_assign(&mut self, rhs: U16<O>)

Performs the /= operation.

impl<O: ByteOrder> From<[u8; 2]> for U16<O>

fn from(bytes: [u8; 2]) -> U16<O>

Converts to this type from the input type.

impl<O: ByteOrder> From<u16> for U16<O>

fn from(x: u16) -> U16<O>

Converts to this type from the input type.

impl<O> FromBytes for U16<O>where [u8; 2]: FromBytes, PhantomData<O>: FromBytes,

fn ref_from(bytes: &[u8]) -> Option<&Self>where Self: Sized,

Interprets the given bytes as a &Self without copying.

fn ref_from_prefix(bytes: &[u8]) -> Option<&Self>where Self: Sized,

Interprets the prefix of the given bytes as a &Self without copying.

fn ref_from_suffix(bytes: &[u8]) -> Option<&Self>where Self: Sized,

Interprets the suffix of the given bytes as a &Self without copying.

fn mut_from(bytes: &mut [u8]) -> Option<&mut Self>where Self: Sized + AsBytes,

Interprets the given bytes as a &mut Self without copying.

fn mut_from_prefix(bytes: &mut [u8]) -> Option<&mut Self>where Self: Sized + AsBytes,

Interprets the prefix of the given bytes as a &mut Self without copying.

fn mut_from_suffix(bytes: &mut [u8]) -> Option<&mut Self>where Self: Sized + AsBytes,

Interprets the suffix of the given bytes as a &mut Self without copying.

fn slice_from(bytes: &[u8]) -> Option<&[Self]>where Self: Sized,

Interprets the given bytes as a &[Self] without copying.

fn slice_from_prefix(bytes: &[u8], count: usize) -> Option<(&[Self], &[u8])>where Self: Sized,

Interprets the prefix of the given bytes as a &[Self] with length equal to count without copying.

fn slice_from_suffix(bytes: &[u8], count: usize) -> Option<(&[u8], &[Self])>where Self: Sized,

Interprets the suffix of the given bytes as a &[Self] with length equal to count without copying.

fn mut_slice_from(bytes: &mut [u8]) -> Option<&mut [Self]>where Self: Sized + AsBytes,

Interprets the given bytes as a &mut [Self] without copying.

fn mut_slice_from_prefix( bytes: &mut [u8], count: usize ) -> Option<(&mut [Self], &mut [u8])>where Self: Sized + AsBytes,

Interprets the prefix of the given bytes as a &mut [Self] with length equal to count without copying.

fn mut_slice_from_suffix( bytes: &mut [u8], count: usize ) -> Option<(&mut [u8], &mut [Self])>where Self: Sized + AsBytes,

Interprets the suffix of the given bytes as a &mut [Self] with length equal to count without copying.

fn read_from(bytes: &[u8]) -> Option<Self>where Self: Sized,

Reads a copy of Self from bytes.

fn read_from_prefix(bytes: &[u8]) -> Option<Self>where Self: Sized,

Reads a copy of Self from the prefix of bytes.

fn read_from_suffix(bytes: &[u8]) -> Option<Self>where Self: Sized,

Reads a copy of Self from the suffix of bytes.

impl<O> FromZeroes for U16<O>where [u8; 2]: FromZeroes, PhantomData<O>: FromZeroes,

fn zero(&mut self)

Overwrites self with zeroes.

fn new_zeroed() -> Selfwhere Self: Sized,

Creates an instance of Self from zeroed bytes.

impl<O: Hash> Hash for U16<O>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<O: ByteOrder> LowerHex for U16<O>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> Mul<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the * operator.

fn mul(self, rhs: U16<O>) -> U16<O>

Performs the * operation.

impl<O: ByteOrder> MulAssign<U16<O>> for U16<O>

fn mul_assign(&mut self, rhs: U16<O>)

Performs the *= operation.

impl<O> Not for U16<O>

type Output = U16<O>

The resulting type after applying the ! operator.

fn not(self) -> U16<O>

Performs the unary ! operation.

impl<O: ByteOrder> Octal for U16<O>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<O: ByteOrder> PartialEq<[u8; 2]> for U16<O>

fn eq(&self, other: &[u8; 2]) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<O: PartialEq> PartialEq<U16<O>> for U16<O>

fn eq(&self, other: &U16<O>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<O: ByteOrder> Rem<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the % operator.

fn rem(self, rhs: U16<O>) -> U16<O>

Performs the % operation.

impl<O: ByteOrder> RemAssign<U16<O>> for U16<O>

fn rem_assign(&mut self, rhs: U16<O>)

Performs the %= operation.

impl<O: ByteOrder> Shl<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the << operator.

fn shl(self, rhs: U16<O>) -> U16<O>

Performs the << operation.

impl<O: ByteOrder> ShlAssign<U16<O>> for U16<O>

fn shl_assign(&mut self, rhs: U16<O>)

Performs the <<= operation.

impl<O: ByteOrder> Shr<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the >> operator.

fn shr(self, rhs: U16<O>) -> U16<O>

Performs the >> operation.

impl<O: ByteOrder> ShrAssign<U16<O>> for U16<O>

fn shr_assign(&mut self, rhs: U16<O>)

Performs the >>= operation.

impl<O: ByteOrder> Sub<U16<O>> for U16<O>

type Output = U16<O>

The resulting type after applying the - operator.

fn sub(self, rhs: U16<O>) -> U16<O>

Performs the - operation.

impl<O: ByteOrder> SubAssign<U16<O>> for U16<O>

fn sub_assign(&mut self, rhs: U16<O>)

Performs the -= operation.

impl<O: ByteOrder, P: ByteOrder> TryFrom<U128<P>> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: U128<P>) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder, P: ByteOrder> TryFrom<U32<P>> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: U32<P>) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder, P: ByteOrder> TryFrom<U64<P>> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: U64<P>) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder> TryFrom<u128> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: u128) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder> TryFrom<u32> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: u32) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder> TryFrom<u64> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: u64) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder> TryFrom<usize> for U16<O>

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(x: usize) -> Result<U16<O>, TryFromIntError>

Performs the conversion.

impl<O: ByteOrder> UpperHex for U16<O>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<O: Copy> Copy for U16<O>

impl<O: Eq> Eq for U16<O>

impl<O> StructuralEq for U16<O>

impl<O> StructuralPartialEq for U16<O>

impl<O> Unaligned for U16<O>where [u8; 2]: Unaligned, PhantomData<O>: Unaligned,