1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
use crate::cipher::{MessageDecrypter, MessageEncrypter};
use crate::error::TLSError;
use crate::msgs::message::{BorrowMessage, Message};
static SEQ_SOFT_LIMIT: u64 = 0xffff_ffff_ffff_0000u64;
static SEQ_HARD_LIMIT: u64 = 0xffff_ffff_ffff_fffeu64;
#[derive(PartialEq)]
enum DirectionState {
/// No keying material.
Invalid,
/// Keying material present, but not yet in use.
Prepared,
/// Keying material in use.
Active,
}
pub struct RecordLayer {
message_encrypter: Box<dyn MessageEncrypter>,
message_decrypter: Box<dyn MessageDecrypter>,
write_seq: u64,
read_seq: u64,
encrypt_state: DirectionState,
decrypt_state: DirectionState,
}
impl RecordLayer {
pub fn new() -> RecordLayer {
RecordLayer {
message_encrypter: MessageEncrypter::invalid(),
message_decrypter: MessageDecrypter::invalid(),
write_seq: 0,
read_seq: 0,
encrypt_state: DirectionState::Invalid,
decrypt_state: DirectionState::Invalid,
}
}
pub fn is_encrypting(&self) -> bool {
self.encrypt_state == DirectionState::Active
}
pub fn is_decrypting(&self) -> bool {
self.decrypt_state == DirectionState::Active
}
/// Prepare to use the given `MessageEncrypter` for future message encryption.
/// It is not used until you call `start_encrypting`.
pub fn prepare_message_encrypter(&mut self, cipher: Box<dyn MessageEncrypter>) {
self.message_encrypter = cipher;
self.write_seq = 0;
self.encrypt_state = DirectionState::Prepared;
}
/// Prepare to use the given `MessageDecrypter` for future message decryption.
/// It is not used until you call `start_decrypting`.
pub fn prepare_message_decrypter(&mut self, cipher: Box<dyn MessageDecrypter>) {
self.message_decrypter = cipher;
self.read_seq = 0;
self.decrypt_state = DirectionState::Prepared;
}
/// Start using the `MessageEncrypter` previously provided to the previous
/// call to `prepare_message_encrypter`.
pub fn start_encrypting(&mut self) {
debug_assert!(self.encrypt_state == DirectionState::Prepared);
self.encrypt_state = DirectionState::Active;
}
/// Start using the `MessageDecrypter` previously provided to the previous
/// call to `prepare_message_decrypter`.
pub fn start_decrypting(&mut self) {
debug_assert!(self.decrypt_state == DirectionState::Prepared);
self.decrypt_state = DirectionState::Active;
}
/// Set and start using the given `MessageEncrypter` for future outgoing
/// message encryption.
pub fn set_message_encrypter(&mut self, cipher: Box<dyn MessageEncrypter>) {
self.prepare_message_encrypter(cipher);
self.start_encrypting();
}
/// Set and start using the given `MessageDecrypter` for future incoming
/// message decryption.
pub fn set_message_decrypter(&mut self, cipher: Box<dyn MessageDecrypter>) {
self.prepare_message_decrypter(cipher);
self.start_decrypting();
}
/// Return true if the peer appears to getting close to encrypting
/// too many messages with this key.
///
/// Perhaps if we send an alert well before their counter wraps, a
/// buggy peer won't make a terrible mistake here?
///
/// Note that there's no reason to refuse to decrypt: the security
/// failure has already happened.
pub fn wants_close_before_decrypt(&self) -> bool {
self.read_seq == SEQ_SOFT_LIMIT
}
/// Return true if we are getting close to encrypting too many
/// messages with our encryption key.
pub fn wants_close_before_encrypt(&self) -> bool {
self.write_seq == SEQ_SOFT_LIMIT
}
/// Return true if we outright refuse to do anything with the
/// encryption key.
pub fn encrypt_exhausted(&self) -> bool {
self.write_seq >= SEQ_HARD_LIMIT
}
/// Decrypt a TLS message.
///
/// `encr` is a decoded message allegedly received from the peer.
/// If it can be decrypted, its decryption is returned. Otherwise,
/// an error is returned.
pub fn decrypt_incoming(&mut self, encr: Message) -> Result<Message, TLSError> {
debug_assert!(self.decrypt_state == DirectionState::Active);
let seq = self.read_seq;
self.read_seq += 1;
self.message_decrypter
.decrypt(encr, seq)
}
/// Encrypt a TLS message.
///
/// `plain` is a TLS message we'd like to send. This function
/// panics if the requisite keying material hasn't been established yet.
pub fn encrypt_outgoing(&mut self, plain: BorrowMessage) -> Message {
debug_assert!(self.encrypt_state == DirectionState::Active);
assert!(!self.encrypt_exhausted());
let seq = self.write_seq;
self.write_seq += 1;
self.message_encrypter
.encrypt(plain, seq)
.unwrap()
}
}